casekasce.blogg.se - Installing zadig driver on mac

#Installing zadig driver on mac for mac os#
#Installing zadig driver on mac Pc#
#Installing zadig driver on mac free#

Press and release the reset button, PB5 to boot normally. Keep holding down PB1, when both LEDs are lit, release PB1 to select the factory reset option.īoth LEDs should quickly flash 4 times, a third LED (LD1) will turn on.Īfter the file system is reset, all LEDs will turn off and the device will enter safe mode. Both lit corresponds to the factory reset option. The LD2 and LD3 will then flash, cycling through various lighting combinations corresponding to different options.

#Installing zadig driver on mac for mac os#

Installing the flashing utility (for Mac OS and Linux) Download and install the dfu-util package for Mac OS X, or the 32-bit / 64-bit package for Ubuntu 12.04 and later from the 'Other Downloads' section of this page. While still holding down PB1, press and release the reset button PB5. Zadig will install the driver, and should report success.

#Installing zadig driver on mac Pc#

Perform a factory reset as follows (Note these instructions are a slight modification of the PyBoard factory reset instruction given here):Ĭonnect your CutiPy to your PC using the MicroUSB cable. For this reason we recommend backing up your files if you have made any changes. The factory reset will delete all files present on the board. Now reconnnect the MicroUSB cable.Īfter installing the firmware you can open a MicroPython REPL(read evaluate print loop) console (covered here ), and verify the firmware version by entering the following into the REPL console

Safely eject and disconnect the USB (Remove power), shift the JB2 pin jumper back to the original location (BT0 and FLS should now be joined).

Follow the EMAC DFU instructions given here Safely eject and disconnect the USB (Remove power), shift the JB2 pin jumper back to the original location (BT0 and FLS should now be joined).

#Installing zadig driver on mac free#

This program is Free Softwasre and has ABSOLUTELY NO WARRANTY C:\Users\MyUser\Desktop\dfu-util-0.9-win64>dfu-util -lĬopyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.Ĭopyright 2010-2016 Tormod Volden and Stefan Schmidt